Here’s another Welder K24 replica I acquired a couple of days back. That one is really a stealthy searching black number from U-Boat designer Italo Fontano.
It arrived a neat little Water-tight situation having a three dimensional rubber Welder Logo design on top. Awesome! This situation is really awesome and helpful. It sure did it’s job of safeguarding the timepiece once the FedEx guy dropped my package to the tiled floor of my office, at the front of me! She got all red-colored hard from embarrassment. I shrugged cheap Welder K24 replica them back.
Within the situation was, obviously the timepiece, a data sheet for setting the timepiece along with a coupon for any rubber watch band obtainable in October.
First Impression from the watch? Gee, it sorta jogs my memory of the U-Boat, right! So, rather cheap I compensated about $500 for any watch in the same designer. Sure, minus a Swiss movement contributing to 18K of gold it’s look similar, yea? Style smart you can observe the commonalities.
Second Impression. IT’S A HONKIN’ Large WATCH!!
It’s spec’ed at 48mm. That’s only the Bezel. Add some Crown bar and Chrono buttons as well as your up for 60mm of watch. That’s concerning the greatest watch I’ve worn ever.
The conclusion is great from what I can tell. The IPB treated situation is really a matte black. The Welder K24 3601 replica I purchased is really a black faced, whitened number Chrono with IPB treated situation and black leather Band. Stealthy. The leather band also carries the U-Boat signature metal Carry Tab exhibiting the Welder logo design.
Tugging this Bad Boy from the situation it seems to become a heavy contender. Literally 120 gr. heavy. Since I’m use to heavy, hunky chunky watches we immediately felt an association to one another. Gotta whip that one on NOW!
When I usually put on watches with Metal Bracelets I battled a little to use the leather strap. A little stiff just like any new leather watch band.
Following a couple of moments I'd the timepiece on nice and……awwww garbage! The crown is around the left side, causeing this to be see a righty. I understood that whenever I purchased it foreseeing it will likely be awesome to possess a righty. So following a couple of more moments I acquired the timepiece from the left and set her around the right.
A little of waving and failing round the watch chosen my wrist. I Quickly carried out the flex test, bending the wrist up and lower. The crown touches however it didn’t feel intrusive against my up-bent wrist. Without a doubt it might be fine on my small left wrist. BUT would ya put on a righty in your lefty? Hmmmmmm….
On the rear of the situation there's some info etched on regarding movement, material, Diving depth and weight. Even the serial number.
Next I performed using the functions. Nothing special. It labored like every Quarta movement Chrono. Setting the timepiece was nothing special.
The Welder K24 3306 replica Date window can be found in the 9 position. Obvious and readable.
The Face Area is matte black with whitened amounts and index. Luminous hands and also the number two, 4, 8 and 10. The chrono minute dial can also be luminous out of the box the Chrono Second hands. How luminous? Meh, it’s ok, not excessively vibrant but ok. Compared to my Seiko diver SKX-007 it’s dim.
So what’s the decision? It’s a awesome watch, ideal for the hunky chunky crowd. Love U-Boat but can’t afford it much like me? Here ya go. Great styling, excellent finish and guaranteed to help you look a little thinner (remember 60mm?) this could would you all right.
Thank you for reading through my review!